Metal Base PCB

/ / Copper Base PCB

The copper PCB is the most expensive one in the metal substrates. The thermal conductivity is many times higher than the aluminum substrate and . It is used for high-frequency circuits and the big difference temperature variations. The thermal conductivity can be 0.8~3.0 W/c.K.

6 Comments to “ Metal Base PCB”

  1. […] you can perform the steps with success, the metal-clad PCB should be safe and ready for extreme […]

  2. […] So, if you are considering working with the flex PCB, at first, you need to understand what is flexible PCB in reality.  For our valued customers’ convenience, we are going to reveal the definition, fabrication, design, and common types of flexible PCBs with their usage in today’s episode on metal base PCB discussion. […]

  3. […] metal PCB and ceramic PCB, the polyimide made printed circuit boards also have multiple types. These […]

  4. […] it comes to removing stubborn solder from the metal PCB or ceramic PCB, you can use a desoldering pump or iron for the process. The soldering pump is also […]

  5. […] you have brought out the metal portion of the wire, you need to connect its one end with the resistor. You can use solders to touch one […]

  6. […] you have adequately heated both components, you need to create a small cracking between the metal pad and the leads. Then wait for two to four seconds briefly, and pour the solder on the crack. Once […]

Leave a Reply

Your email address will not be published. Required fields are marked *