Description
| Items | Mass Production | Low Volume | |
| Total Layers | 2～16L | 20L | |
| Layers of sofe | 10L | 16L | |
| PCB Thickness | ≤2.4mm | / | |
| Line width/Line space | Inner layer | 3mil/3mil (HOz) | 2.5mil/2.5mil (HOz) |
| Outer layer | 4mil/4mil (1Oz) | 3mil/3mil (1Oz) | |
| Hole Ring | ≥6mil | 4mil | |
| Impedance Control | +/-10% | / | |
| Drilling | Machine drilling | ≥8mil | 6mil |
| Laser drilling | 5mil/6mil | 4mil | |
| Aspect Ratio | 10:01 | 16:01 | |
| Surface Coating | ENIG, Immersion Silver, Immersion Tin, OSP | ||
Why you need to choose the Flex PCB?
- Flex PCBs are incredibly space-saving. In fact, it only requires 10% of space compared to the conventional standard PCBs. It offers great freedom when it comes to packaging and installation.
- You can achieve the tightest blend capacity with the flex PCBs. Its permeability and flexibility offer such bending.
- The flex boards work with only a minimal number of interconnections. Fewer connections mean the PCB will need fewer solder joints and contact crimps. It implies that fewer loopholes are resulting in the least failures. Thus, it dramatically enhances the reliability of the components.
- It works with every possible connector and component available in the market. Also, it works better with ZIP connectors. So, you get enhanced capabilities with the use of these circuits.
- The flexible circuits are made to function under extreme and challenging conditions. So, these circuits won’t face reduced performance even when the temperature is high or in the presence of chemicals and radiation. To put it simply, these are temperature, chemical, and radiation-resistant.
- Flexible circuits have fewer connections and components. Also, it comes in a smaller size. All these results in an extreme saving of flexible PCB cost. So, you can save a considerable amount with the flexible circuits.
The main activity of our company is the development and production of prototypes of electronic devices.
Our capabilities:
– development of analog and digital electronics
– development and manufacture of printed circuit boards of any complexity
– electronic components supply and assembly
– production of serial and single electronics
– development of software for microcontrollers, signal processors and computers
– development and manufacture of cases and front panels
The design of a PCB board can be divided into several stages:
– Development of a schematic diagram according to the technical specifications of the customer;
– Selection of components and body of the device;
– Tracing of the printed circuit board according to the schematic diagram;
– Production of prototypes of printed circuit boards;
– Manual and automatic assembly of printed circuit board samples;
– development of software for microcontrollers
– Debugging and launch into production
– Electrical testing and configuration of the finished product according to the Customer’s documentation;
– Launching a prototype into serial production.
We have experience in the development of lighting control devices, industrial controllers and water shut-off valve control units.
There is sufficient experience in solving a number of problems. However, if for any reason (technical or other) the task you proposed turns out to be 100% impossible, we will immediately inform you about it.
For manufacturers of electronic devices, FXPCB offers the most important thing: high-quality and fast production at affordable prices of printed circuit boards, electronic modules, and turnkey products.
