ISO 9001 certified

ISO 9001 Certified

ISO 14001 certified

ISO 14001 Certified

RoHS certified

RoHS Compliant

0.6mm PCB Boards - Custom Manufacturer

SFX PCB manufactures custom 0.6mm PCB boards across a wide range of types — including rigid FR4, flexible, rigid-flex, metal core, and specialty substrate boards. Designed for demanding applications in aerospace, medical, automotive, and telecommunications, these boards are built to tight tolerances with ISO-certified quality and RoHS/REACH compliance.

6 Layer PCB
Ceramic PCB
Transparent Glass PCB
Single Layer Flex PCB
Flex PCB
Rigid FR4 PCB
Tg180 & High Tg PCB
Rogers PCB
Custom PCB and PCBA Manufacturing Services
Black FR4 PCB
Copper Core PCB
Heavy Copper PCB
Metal Core PCB (MCPCB)
Copper Coin PCB
Aluminum Base PCB
Rigid Flex PCB
Multilayer PCB
Multilayer Rigid Flex PCB

Our Range of Products
6 Layer PCB

6 Layer PCB

  • 6 layers with blind & buried via support
  • Impedance control for high-speed signals
  • Min. 0.07mm line width for dense routing
Ceramic PCB

Ceramic PCB

  • ALN thermal conductivity ≥170 W/(m·K)
  • DPC technology eliminates microbubbles
  • Dielectric strength ≥17 KV/mm insulation
Transparent Glass PCB

Transparent Glass PCB

  • 85%–96% transparency for optical designs
  • Dielectric loss 2–3x lower than silicon
  • Copper adhesivity 3.0, 6–45μm thickness
Single Layer Flex PCB

Single Layer Flex PCB

  • Flexes up to 500 million cycles reliably
  • Fine line width down to 2.5mil/2.5mil
  • Polyimide base with ≤0.4mm slim profile
Flex PCB

Flex PCB

  • Up to 8 layers in low-volume production
  • 4mil laser drilling for tight tolerances
  • A-class complexity, short lead times
Rigid FR4 PCB

Rigid FR4 PCB

  • 1 to 68 layer count for complex designs
  • ISO-9001, UL & IPC standards certified
  • Rogers, Isola & Ventec materials supported

Showing 1 to 6 of 18 results

Frequently Asked Questions

What board types are available at 0.6mm thickness?

FX PCB manufactures a broad range of 0.6mm boards including rigid FR4, high-Tg, multilayer, flex, rigid-flex, aluminum base, metal core, ceramic, Rogers, transparent glass, copper core, heavy copper, and black FR4 PCBs. Minimum thickness starts at 0.1mm for rigid boards and 0.05mm for rigid-flex, with 0.6mm being a commonly supported standard thickness across most product lines.

What materials can be used for 0.6mm PCB boards?

Can FX PCB manufacture 0.6mm PCBs with impedance control?

What surface finishes are available for 0.6mm PCBs?

Are 0.6mm PCB boards RoHS and REACH compliant?

What is the typical lead time for custom 0.6mm PCBs?

What file formats does FX PCB accept for 0.6mm PCB orders?

Didn't find what you're looking for?

Talk to our experts for custom solutions and tailored guidance.

Industries We Serve

Aerospace & Defense

Aerospace & Defense

High-reliability 0.6mm PCBs for radar systems, avionics, military electronics, and night vision equipment requiring extreme durability.

Medical Devices

Medical Devices

Precision 0.6mm PCBs for hearing aids, MRI systems, defibrillators, pulse generators, and diagnostic imaging equipment.

Automotive Electronics

Automotive Electronics

Compact, thermally stable 0.6mm PCBs for EV modules, ABS systems, dashboards, and power control electronics in vehicles.

Telecommunications

Telecommunications

High-frequency 0.6mm PCBs for 5G base stations, RF amplifiers, antennas, radar systems, and telecom infrastructure hardware.

Didn't find what you're looking for?

Talk to our experts for custom solutions and tailored guidance.

You might also like

Transparent Glass PCB | 0.5mm PCB Boards

0.5mm PCB Boards

SFX PCB's 0.5mm PCB Boards category covers a comprehensive range of ultra-thin printed circuit boards including rigid FR4, flexible polyimide, rigid-flex, metal core, ceramic, glass, and specialty substrate PCBs. Designed for high-density, miniaturized applications across aerospace, medical, telecommunications, and consumer electronics, these boards deliver precision engineering with ISO-certified quality assurance.
Flex PCB | Flex PCB Manufacturer with Custom Fabrication Capabilities

Flex PCB Manufacturer with Custom Fabrication Capabilities

FX PCB offers a comprehensive range of custom flex PCB solutions including Single Layer Flex PCBs, Flex PCBs, Rigid Flex PCBs, and Multilayer Rigid Flex PCBs. Built on polyimide substrates with advanced fabrication capabilities, these boards serve aerospace, medical, automotive, and consumer electronics industries with ISO-certified quality and 15+ years of manufacturing expertise.
Single Layer Flex PCB | Flex PCB Quote for Custom Manufacturing

Flex PCB Quote for Custom Manufacturing

SFX PCB offers custom flex PCB manufacturing including Single Layer Flex PCBs, multi-layer Flex PCBs, and Rigid-Flex PCBs using polyimide substrates. Designed for applications in medical, aerospace, automotive, and consumer electronics, these boards deliver exceptional flexibility, miniaturization, and reliability with ISO-certified production and fast quote turnaround.

Why Electronics Manufacturers Choose FX PCB

15+ Years of PCB Manufacturing Expertise

Over 15 years delivering complex PCB and PCBA solutions across aerospace, medical, automotive, and telecom industries with consistent quality.

ISO-Certified, 100% Electrically Tested

Every board undergoes 100% electrical testing in ISO 9001, ISO 14001, and ISO 13485 certified facilities, ensuring zero-defect shipments.

Prototype to High-Volume, One Supplier

Seamlessly scale from 24-hour prototype quotes to mass production runs without switching suppliers, with free DFM analysis on every order.

Get a Custom 0.6mm PCB Quote Within 24 Hours

Submit your Gerber files and specifications. Our engineers will review your design and deliver an official quote within 24 hours.

Contact Us Today

For immediate assistance, feel free to give us a direct call at (+1) 5103455000 You can also send us a quick email at info@sfxpcb.com